project-lamp/project-lamp.ino

#include "FastLED.h"
#include "FastLED_RGBW.h"
#include <IRremote.h>
 
#define NUM_LEDS 1
#define DATA_PIN 3

#define IR_RECEIVE_PIN 2
#undef ENABLE_LED_FEEDBACK
#define ENABLE_LED_FEEDBACK 0

CRGBW COL_RED    (255,  0,  0,  0);
CRGBW COL_GREEN  (  0,255,  0,  0);
CRGBW COL_BLUE   (  0,  0,255,  0);
CRGBW COL_WHITE  (  0,  0,  0,255);
CRGBW COL_SUM    (255,255,255,255);
CRGBW COL_AMBER  (255,191,  0,  0);
CRGBW COL_LIME   (127,255,  0,  0);
CRGBW COL_AZURE  (  0,127,255,  0);
CRGBW COL_ORANGE (255,127,  0,  0);
CRGBW COL_CYAN   (  0,255,255,  0);
CRGBW COL_UV     ( 63,  0,255,  0);
CRGBW COL_PEACHY (255, 63,  0,  0);
CRGBW COL_SPRING (  0,255,127,  0);
CRGBW COL_MAGENTA(255,  0,255,  0);
CRGBW COL_YELLOW (255,255,  0,  0);
CRGBW COL_VIOLET (127,  0,255,  0);
CRGBW COL_ROSE   (255,  0,127,  0);

CRGBW desaturate(CRGBW col)
{
  return CRGBW(col.red, col.green, col.blue, col.white + 64);
}

struct ColourCode
{
  uint32_t code;
  uint32_t altCode;
  CRGBW colour;
  CRGBW altColour;
  
  ColourCode(uint32_t c, uint32_t c2,CRGBW col)
  {
    code = c;
    altCode = c2;
    colour = col;
    altColour = desaturate(col);
  }
  
  ColourCode(uint32_t c, uint32_t c2, CRGBW colA, CRGBW colB)
  {
    code = c;
    altCode = c2;
    colour = colA;
    altColour = colB;
  }
};

const ColourCode colourCodes[] =
{
  {0xE619FF00, 0xFB04EF00, COL_RED},
  {0xE41BFF00, 0xFA05EF00, COL_GREEN},
  {0xEE11FF00, 0xF906EF00, COL_BLUE},
  {0xEA15FF00, 0xF807EF00, COL_SUM, COL_WHITE},
  {0xE817FF00, 0xF708EF00, COL_AMBER},
  {0xED12FF00, 0xF609EF00, COL_LIME},
  {0xE916FF00, 0xF50AEF00, COL_AZURE},
  {0xBF40FF00, 0xF30CEF00, COL_ORANGE},
  {0xB34CFF00, 0xF20DEF00, COL_CYAN},
  {0xFB04FF00, 0xF10EEF00, COL_UV},
  {0xF50AFF00, 0xEF10EF00, COL_PEACHY},
  {0xE11EFF00, 0xEE11EF00, COL_SPRING},
  {0xF10EFF00, 0xED12EF00, COL_MAGENTA},
  {0xE31CFF00, 0xEB14EF00, COL_YELLOW},
  {0xEB14FF00, 0xEA15EF00, COL_VIOLET},
  {0xF00FFF00, 0xE916EF00, COL_ROSE}
};

const uint32_t CODE_BRIGHTER = 0xFF00EF00;
const uint32_t CODE_DIMMER   = 0xFE01EF00;
const uint32_t CODE_OFF      = 0xFD02EF00;
const uint32_t CODE_ON       = 0xFC03EF00;
const uint32_t CODE_FLASH    = 0xF40BEF00;
const uint32_t CODE_STROBE   = 0xF00FEF00;
const uint32_t CODE_FADE     = 0xEC13EF00;
const uint32_t CODE_SMOOTH   = 0xE817EF00;

const int NUM_COLOURCODES = sizeof(colourCodes) / sizeof(ColourCode);
 
CRGBW leds[NUM_LEDS];
CRGB *ledsRGB = (CRGB *) &leds[0];

//IRrecv irrecv(IR_RECEIVE_PIN);/

uint8_t brightness = 128;
uint32_t lastCode = 0;

decode_results results;

void colorFill(CRGBW c){
  for(int i = 0; i < NUM_LEDS; i++){
    leds[i] = c;
    FastLED.show();
    delay(50);
  }
}
 
void colorFill(CRGB c){
  for(int i = 0; i < NUM_LEDS; i++){
    leds[i] = c;
    FastLED.show();
    delay(50);
  }
}
 
void setup() { 
    FastLED.addLeds<WS2812B, DATA_PIN, RGB>(ledsRGB, getRGBWsize(NUM_LEDS));
    colorFill(COL_SUM);
    FastLED.setBrightness(255);
    FastLED.show();
    pinMode(LED_BUILTIN, OUTPUT);

    Serial.begin(115200);
#if defined(__AVR_ATmega32U4__)
    while (!Serial)
        ; //delay for Leonardo, but this loops forever for Maple Serial
#endif
#if defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
    delay(2000); // To be able to connect Serial monitor after reset and before first printout
#endif
    // Just to know which program is running on my Arduino
    Serial.println(F("START " __FILE__ " from " __DATE__));

    // In case the interrupt driver crashes on setup, give a clue
    // to the user what's going on.
    Serial.println("Enabling IRin");
//    irrecv.enableIRIn(); // Start the receiver/
    IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);

    Serial.print(F("Ready to receive IR signals at pin "));
    Serial.println(IR_RECEIVE_PIN);
}
 


void interpretColourCode(uint32_t code)
{
    for (int i = 0; i < NUM_COLOURCODES; i++)
    {
      ColourCode col = colourCodes[i];
      if (col.code == code || col.altCode == code)
      {
        if (code == lastCode)
        {
          Serial.println(F("Colour code OK - Secondary"));
          colorFill(col.altColour);
          lastCode = 0;
        }
        else
        {
          Serial.println(F("Colour code OK - Primary"));
          colorFill(col.colour);
          lastCode = code;
        }
        return;
      }
      else
      {
//         Serial.print(code, HEX);
//         Serial.print(F(" != "));
//         Serial.println(col.code, HEX);
      }
    }
    Serial.println(F("CODE?!?!"));
}

void loop()
{
  if (IrReceiver.decode()) 
  {
    uint32_t data = IrReceiver.decodedIRData.decodedRawData;
    Serial.println(data, HEX);
    IrReceiver.resume(); // Receive the next value
    switch(data)
    {
      case CODE_BRIGHTER:
        brightness += 32;
        FastLED.setBrightness(brightness);
        FastLED.show();
        Serial.println(F("Brighter"));
        break;
      case CODE_DIMMER:
        brightness -= 32;
        FastLED.setBrightness(brightness);
        FastLED.show();
        Serial.println(F("Dimmer"));
        break;
      case CODE_OFF:
        FastLED.setBrightness(0);
        FastLED.show();
        Serial.println(F("Off"));
        break;
      case CODE_ON:
        FastLED.setBrightness(brightness);
        FastLED.show();
        Serial.println(F("On"));
        break;
      default:
        interpretColourCode(data);
        Serial.println(F("Set colour"));
        
    }
    if (brightness <= 0)
      brightness = 255;
  }
  delay(100);
}