project-lamp/project-lamp.ino

#include "FastLED.h"
#include "FastLED_RGBW.h"
#include <IRremote.h>
 
#define NUM_LEDS 1
#define DATA_PIN 4

#define IR_RECEIVE_PIN 2

CRGBW COL_RED    (255,  0,  0,  0);
CRGBW COL_GREEN  (  0,255,  0,  0);
CRGBW COL_BLUE   (  0,  0,255,  0);
CRGBW COL_WHITE  (  0,  0,  0,255);
CRGBW COL_SUM    (255,255,255,255);
CRGBW COL_AMBER  (255,191,  0,  0);
CRGBW COL_LIME   (127,255,  0,  0);
CRGBW COL_AZURE  (  0,127,255,  0);
CRGBW COL_ORANGE (255,127,  0,  0);
CRGBW COL_CYAN   (  0,255,255,  0);
CRGBW COL_UV     ( 63,  0,255,  0);
CRGBW COL_PEACHY (255, 63,  0,  0);
CRGBW COL_SPRING (  0,255,127,  0);
CRGBW COL_MAGENTA(255,  0,255,  0);
CRGBW COL_YELLOW (255,255,  0,  0);
CRGBW COL_VIOLET (127,  0,255,  0);
CRGBW COL_ROSE   (255,  0,127,  0);

CRGBW desaturate(CRGBW col)
{
  return CRGBW(col.red, col.green, col.blue, col.white + 64);
}

struct ColourCode
{
  uint32_t code;
  CRGBW colour;
  CRGBW altColour;
  
  ColourCode(uint32_t c, CRGBW col)
  {
    code = c;
    colour = col;
    altColour = desaturate(col);
  }
  
  ColourCode(uint32_t c, CRGBW colA, CRGBW colB)
  {
    code = c;
    colour = colA;
    altColour = colB;
  }
};

const ColourCode colourCodes[] =
{
  {0x97483BFB, COL_RED},
  {0x86B0E697, COL_GREEN},
  {0x9EF4941F, COL_BLUE},
  {0xA3C8EDDB, COL_SUM, COL_WHITE},
  {0x5BE75E7F, COL_AMBER},
  {0xF377C5B7, COL_LIME},
  {0xC101E57B, COL_AZURE},
  {0xD7E84B1B, COL_ORANGE},
  {0xEE4ECCFB, COL_CYAN},
  {0x51E43D1B, COL_UV},
  {0x2A89195F, COL_PEACHY},
  {0xF63C8657, COL_SPRING},
  {0x44C407DB, COL_MAGENTA},
  {0x488F3CBB, COL_YELLOW},
  {0x13549BDF, COL_VIOLET},
  {0x35A9425F, COL_ROSE}
};

const uint32_t CODE_BRIGHTER = 0xE5CFBD7F;
const uint32_t CODE_DIMMER   = 0xA23C94BF;
const uint32_t CODE_OFF      = 0xE721C0DB;
const uint32_t CODE_ON       = 0xF0C41643;

const int NUM_COLOURCODES = sizeof(colourCodes) / sizeof(ColourCode);
 
CRGBW leds[NUM_LEDS];
CRGB *ledsRGB = (CRGB *) &leds[0];

IRrecv irrecv(IR_RECEIVE_PIN);

uint8_t brightness = 128;
uint32_t lastCode = 0;

decode_results results;

 
void setup() { 
    FastLED.addLeds<WS2812B, DATA_PIN, RGB>(ledsRGB, getRGBWsize(NUM_LEDS));
    FastLED.setBrightness(128);
    FastLED.show();
    pinMode(LED_BUILTIN, OUTPUT);

    Serial.begin(115200);
#if defined(__AVR_ATmega32U4__)
    while (!Serial)
        ; //delay for Leonardo, but this loops forever for Maple Serial
#endif
#if defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
    delay(2000); // To be able to connect Serial monitor after reset and before first printout
#endif
    // Just to know which program is running on my Arduino
    Serial.println(F("START " __FILE__ " from " __DATE__));

    // In case the interrupt driver crashes on setup, give a clue
    // to the user what's going on.
    Serial.println("Enabling IRin");
    irrecv.enableIRIn(); // Start the receiver

    Serial.print(F("Ready to receive IR signals at pin "));
    Serial.println(IR_RECEIVE_PIN);
}
 
void colorFill(CRGBW c){
	for(int i = 0; i < NUM_LEDS; i++){
		leds[i] = c;
		FastLED.show();
		delay(50);
	}
}
 
void colorFill(CRGB c){
	for(int i = 0; i < NUM_LEDS; i++){
		leds[i] = c;
		FastLED.show();
		delay(50);
	}
}

void interpretColourCode(uint32_t code)
{
    for (int i = 0; i < NUM_COLOURCODES; i++)
    {
      ColourCode col = colourCodes[i];
      if (col.code == code)
      {
        if (code == lastCode)
        {
          colorFill(col.altColour);
          lastCode = 0;
        }
        else
        {
          colorFill(col.colour);
          lastCode = code;
        }
        break;
      }
    }
}

void loop()
{
  if (irrecv.decode(&results)) 
  {
    Serial.println(results.value, HEX);
    irrecv.resume(); // Receive the next value
    switch(results.value)
    {
      case CODE_BRIGHTER:
        brightness += 32;
        FastLED.setBrightness(brightness);
        FastLED.show();
        break;
      case CODE_DIMMER:
        brightness -= 32;
        FastLED.setBrightness(brightness);
        FastLED.show();
        break;
      case CODE_OFF:
        FastLED.setBrightness(0);
        FastLED.show();
        break;
      case CODE_ON:
        FastLED.setBrightness(brightness);
        FastLED.show();
        break;
      default:
        interpretColourCode(results.value);
        
    }
  }
  delay(100);
}